Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #67

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] To keep the USB cable for the webcam out of the way, we'll wrap it around the main platform of the E-Chassis. Because the Electronics Tube will have to fit over the entire assembly, it's important that the wraps of cable are side-by-side and do not stack on top of each-other.
[* black] Depending on where the end of the doubled-up cable ends up (that seems to vary every time we build an E-Chassis) you can use the velcro strip that came with it, some tape, or a small zip tie to hold it in place.
[* black] The resulting bundle should lay flat against the E-Chassis platform, but be pushed to the side enough so that when the camera platform is pointing all the way up or down, the camera doesn't collide with the cable.

Image 1

No previous image

Added

Image 2

No previous image

Added