Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #64

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereAttach the Controller Board to the E-Chassis using M3 nylon screws and nuts as shown.
[* icon_note] For the screw hole closest to the DB-25 connector, the ESC near the edge may need to be lifted slightly to put the screw in place
.
[* black] Insert wisdom hereAttach the Controller Board to the E-Chassis using M3 nylon screws and nuts as shown.
[* icon_note] For the screw hole closest to the DB-25 connector, the ESC near the edge may need to be lifted slightly to put the screw in place
.