OpenROV
/
/

Site Navigation

Your Account

Choose Language

Changes to Step #62

Edit by OpenROV (Sofar) —

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereNow insert one end of the Ethernet Jumper into the jack on the Homeplug Adapter Board. You should hear or feel a click from the plug locking into place.
[* black] Place an M3 nylon screw through the bottom of the controller board in the hole adjacent to the AtMEGA chip. Secure the 23mm threaded nylon standoff to the shaft of the screw on the other side (the top) side of the board.
[* black] Insert wisdom hereNow insert one end of the Ethernet Jumper into the jack on the Homeplug Adapter Board. You should hear or feel a click from the plug locking into place.
[* black] Place an M3 nylon screw through the bottom of the controller board in the hole adjacent to the AtMEGA chip. Secure the 23mm threaded nylon standoff to the shaft of the screw on the other side (the top) side of the board.