Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #61

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereIf the length of any of the header pins is significantly longer then its neighbors, you can trim it down to be even with the others using a diagonal cutter. You'll want the pins to be similar heights so that they fit into the female headers cleanly.
[* black] Place the Homeplug Adapter Board onto the controller board so that each of it's two sets of pins fit into he respective female headers on the Controller Board. The Ethernet jack on the Homeplug Adapter Board should face away from the ESCs
.
[* black] Insert wisdom hereIf the length of any of the header pins is significantly longer then its neighbors, you can trim it down to be even with the others using a diagonal cutter. You'll want the pins to be similar heights so that they fit into the female headers cleanly.
[* black] Place the Homeplug Adapter Board onto the controller board so that each of it's two sets of pins fit into he respective female headers on the Controller Board. The Ethernet jack on the Homeplug Adapter Board should face away from the ESCs
.