OpenROV
/
/

Site Navigation

Your Account

Choose Language

Changes to Step #60

Edit by OpenROV (Sofar) —

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereThere are five connecting pins between the two boards- three in the front and two in the back. Clip these pins as close as you can to the power regulation board (the one without the Ethernet jack) to separate the boards.
[* icon_caution] Be careful to clip the pins on the side of the power regulation board, NOT on the side of the communication board. You'll need pins coming out of the communication board in order to plug into the Controller Board later on.
[* black] Insert wisdom hereThere are five connecting pins between the two boards- three in the front and two in the back. Clip these pins as close as you can to the power regulation board (the one without the Ethernet jack) to separate the boards.
[* icon_caution] Be careful to clip the pins on the side of the power regulation board, NOT on the side of the communication board. You'll need pins coming out of the communication board in order to plug into the Controller Board later on.