Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #53

Edit by Eric Stackpole

Edit approved by Eric Stackpole

Before
After
Unchanged

Step Lines

[* black] Now it's time to attach the ESCs to the OpenROV Controller Board. In each ESC box, you'll find one ESC, two zip ties, and a bag with shrink tubing and double-sided adhesive. You'll want to keep the zip ties and bag, so put them aside for now.
[* black] We'll want to cut the lead wires from the ESC down to a length of 4cm (NOTE THIS USED TO BE 3CM BUT 4CM IS BETTER- THE PHOTO WILL BE UPDATED SOON4cm. To keep everything looking tidy when mounted to the Controller Board, it's best to start by cutting one of the lead wires to the right length, then use that as a guide to cut the others afterward.
[* black] We'll want to cut the lead wires from the ESC down to a length of 4cm (NOTE THIS USED TO BE 3CM BUT 4CM IS BETTER- THE PHOTO WILL BE UPDATED SOON4cm. To keep everything looking tidy when mounted to the Controller Board, it's best to start by cutting one of the lead wires to the right length, then use that as a guide to cut the others afterward.

Image 2

Old Version

New Version