Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] Were going toLet's cut the syringes! They are used as vent ports for the E-tube end caps. Here's what you'll need
[* black] Were going toLet's cut the syringes! They are used as vent ports for the E-tube end caps. Here's what you'll need
[* black] Two BD [REF 309628] syringes
[* black] Vice
[* black] Hacksaw
[* black] Rag or cloth
[* black] Sandpaper [around 150 grit]
[* black] Hex wrench from kit or small screwdriver (for deburring) use a countersink if you have one
[* black] Remove inner plunger rod from syringe and set aside in clean place