Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #38

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereFind the shortest leadwire in the bundle (it should be the wire coming from the button terminal on the port battery tube) and make sure that it's end is at least 18cm from its length mark.
[* black] Trim the ends off of all the remaining wires so that they end at the same place as the shortest wire.
[* black] Wrap tape around the set of ends in the bundle. This tape cover will help guide the bundle through the mesh sleeve that will be used several steps later
.
[* black] Insert wisdom hereFind the shortest leadwire in the bundle (it should be the wire coming from the button terminal on the port battery tube) and make sure that it's end is at least 18cm from its length mark.
[* black] Trim the ends off of all the remaining wires so that they end at the same place as the shortest wire.
[* black] Wrap tape around the set of ends in the bundle. This tape cover will help guide the bundle through the mesh sleeve that will be used several steps later
.