Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #33

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] Insert wisdom hereCut three 3cm-long lengths of black 3M EPS-300 (adhesive-lined) shrink tubing
[* black] Slide one of the 3cm lengths of adhesive shrink tubing down each of the newly attached leadwires. Make sure the shrink tubing is slid all the way down until it can't slide any further.
[* black] Shrink the tubing with a heat gun. 3M EPS300 seems to need a little more time and heat to fully shrink. Look for the adhesive lining to ooze out the edge of the shrink tubing
.
[* black] Insert wisdom hereCut three 3cm-long lengths of black 3M EPS-300 (adhesive-lined) shrink tubing
[* black] Slide one of the 3cm lengths of adhesive shrink tubing down each of the newly attached leadwires. Make sure the shrink tubing is slid all the way down until it can't slide any further.
[* black] Shrink the tubing with a heat gun. 3M EPS300 seems to need a little more time and heat to fully shrink. Look for the adhesive lining to ooze out the edge of the shrink tubing
.