Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #28

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] Finally, we'll apply potting around the perimeter of the syringes on the main endcaps.
[* icon_caution] A modest amount of potting compound will be needed here- it's better to be conservative then to risk allowing potting to overflow into the hole of the syringe.
[* black] Place the nozzle of the epoxy gun between the outer perimeter of the protruding portion of the syringe and the inner perimeter of the flange disk hole.
[* black] Slowly push epoxy out of the nozzle, again being careful to avoid getting epoxy into the nozzle hole.
[* icon_note] It is often easiest to rotate the endcap about it's syringe rather then moving the nozzle around the endcap.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added