Changes to Step #27
Edit by OpenROV (Sofar) —
Edit approved by OpenROV (Sofar)
- Before
- After
- Unchanged
Step Lines
| [* black] Next, we're going to pot the holes on the forward endcaps. This will seal the holes from water intrusion. |
| [* icon_note] The nozzle from the epoxy gun should be placed firmly into the hole on the endcap. Without a good mate between the nozzle and the endcap, epoxy will ooze out onto the surface of the endcap instead of filling the hole. |
| [* black] Fill the hole of the endcap until a circular bead of epoxy can be seen filing the indented part of the button terminal. |
| [* icon_note] If some epoxy overflows out of the hole onto the surface of the endcap, that's okay- it won't get in the way of anything. |
| [* black] Do this for both forward battery endcaps |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added