Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by Matthew Valancy

Edit approved by Eric Stackpole

Before
After
Unchanged

Step Lines

[* icon_note] In the following set of instructions, we'll walk you through all the steps of building OpenROV v2.5. Although these steps apply to anyone building an OpenROV - whether that be from scratch or from a kit- this instruction set assumes that you already have the parts included with each kit. We hope you'll enjoy this... now let's get started!
[* black] Check to make sure that you have all the necessary parts to build your OpenROV v2.5! If you want to be thorough, check the [https://docs.google.com/a/openrov.com/spreadsheet/ccc?key=0Avf6fUwp9B3kdF9YQWxBTnZjZEVGZVQwY25EbnVyREE&usp=drive_web#gid=1|BOM] to make sure you have all the parts.
[* black] The first thing we're going to build is the internal structure of the ROV which fits inside the ROV Shell. Although we won't actually need the internal structure assembled until much later, building it first will give you practice using the acrylic cement as well as provide some visual motivation!
[* black] The first thing we're going to build is the internal structure of the ROV which fits inside the ROV Shell. Although we won't actually need the internal structure assembled until much later, building it first will give you practice using the acrylic cement as well as provide some visual motivation!