Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #25

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] Okay, this is the part where we attach the rear endcap to the battery tube and pot the channel system in between the two. This part is quite a bit of fun!
[* black] First, sand the inside of one end of the battery tube.
[* icon_caution] '''Don't sand both ends of the tube''' because the other side will need to be smooth for an o-ring to mate with.
[* black] Apply a thin bead of super glue along the rim of the sanded end of the battery tube.
[* black] Insert the aft (spring terminal) endcap into the sanded end of the battery tubes.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added