Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #33

Edit by Zack

Edit approved by Zack


Step Lines

[* black] Now use the epoxy (hysol e-90 or devcon 2-ton flowmix) to seal the syringe in place on both endcaps.
[* black] Be careful not to allow epoxy to over-flow into the hole of the syringe as this will need to be clear for the syringe plunger (which acts as a pressure relief valve).
[* black] Make sure to keep for use later.
[* black] This needs to cure before we can flip it over and do the other side. 3 hours for the Hysol and 8-12 hours for the Devcon.