Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #21

Edit by Zack

Edit approved by Zack

Before
After
Unchanged

Step Lines

[* black] Remount the motors.
[* black] Remount the battery tubes using the re-usuable zipties.
[* black] Run the remaining six 1m lengths along the same route. We're going to use these as auxiliary wires in case you want to connect any modules to your ROV.
[* icon_note] If you have the IMU[http://openrov.myshopify.com/collections/accessories/products/openrov-imu-depth-module|IMU depth/heading sensorsensor] module (or any other modules) now is a good time to splice the wires just like we did with the battery tube wires.
[* icon_note] If you have the IMU[http://openrov.myshopify.com/collections/accessories/products/openrov-imu-depth-module|IMU depth/heading sensorsensor] module (or any other modules) now is a good time to splice the wires just like we did with the battery tube wires.
[* black] Use some new zips or wire to make sure all the wire and cables are out of the way of the props.