Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #18

Edit by Zack

Edit approved by Zack


Step Lines

[* black] Repeat the steps for building the previous endcap, but attach the 1.5mm, and second 6mm disks so that they make a mirror image of the other endcap.
[* black] Make sure you cement the second endcap so it its a MIRROR IMAGE of the other (not identical) as shown.
[* black] Congratulations! You have completed most of the electronics tube endcaps. Now, we'll check to see if they fit well in the main tube.

Image 1

No previous image


Image 2

No previous image