Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Zack

Edit approved by Zack

Before
After
Unchanged

Step Lines

[* black] Make sure the cut syringe is flush with the surface of the inner disk (the 3mm disk).
[* black] Cement the clear, 1.5mm-thick disk to the 6mm-thick disk in the same way the first two were attached. Visually inspect to make sure the disks are concentric (since the hole on the 1.5mm disk is larger then the syringe section.)

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added