Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Zack

Edit approved by Zack

Before
After
Unchanged

Step Lines

[* black] Carefully cut away the blue heatshrink and black adhesive-lined heatshrink from each of the motor wires. The goal to to expose the solder joint as shown.
[* black] This is best done with a very sharp razor blade or scalpel.
[* black] It may be easier to remove the motors from the frame. I chose to leave mine on for this guide.
[* black] Carefully cut away the blue heatshrink and black adhesive-lined heatshrink from each of the motor wires. The goal to to expose the solder joint as shown.
[* black] This is best done with a very sharp razor blade or scalpel.
[* black] It may be easier to remove the motors from the frame. I chose to leave mine on for this guide.