Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by Zack

Edit approved by Zack

Before
After
Unchanged

Step Lines

[* black] This guide will walk you through upgrading your endcaps using the [http://openrov.myshopify.com/collections/accessories/products/endcap-upgrade-kit-to-ver-2-6|OpenROV 2.6 Endcap Upgrade Kit]
[* black] This guide was created using a v2.5 OpenROV
[* black] You will need the following tools:
[* black] Heat gun, Digital Multimeter (recommended), Painters or masking tape, Electrical tape, Soldering iron/solder/helping hands, Hobby knife, Tape measure with metric, Silicone grease or petroleum jelly for lubricating o-rings, Hot glue gun, Hacksaw Wire strippers/clippers, Acrylic cement and applicator syringe, 2-ton epoxy with mixing tube applicator.