Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #69

Edit by Adrian Cotter

Pending approval


Step Lines

[* black] Plug in the other side of ethernet and USB cables to your laptop and watch your ROV power on!
[* black] The USB connector acts as the on/off switch for the ROV.
[* black] It takes a minute or two for everything to boot up. The first thing you'll see is lights indicating power in the top control box. Boards will light up in the electronics chassis -- this takes a little longer.
[* black] The ROV has a built in static IP address of, so to connect with it, your computer's ethernet IP address should be on the same subnet, i.e. "". The subnet mask should be set to