Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #53

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)


Step Lines

[* black] Since the o-rings will make a pretty tight fit with the tubes, it is recommended that a lubricant be used on the o-ring to assure the o-ring gets seated properly.
[* black] We like to use a common lubricant called "MagicLube" which is available at many hardware stores.
[* black] To apply the lubrication to the o-ring, squeeze a small amount of lubrication onto your finger and then move the o-ring through your fingers.
[* icon_caution] When using lubrication it is recommended that you wear gloves.