Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #53

Edit by OpenROV (Sofar)

Edit approved by OpenROV (Sofar)

Before
After
Unchanged

Step Lines

[* black] |Since the o-rings will make a pretty tight fit with the tubes, it is recommended that a lubricant be used on the o-ring to assure the o-ring gets seated properly.
[* black] To apply the lubrication to the o-ring, squeeze a small amount of lubrication onto your finger and then move the o-ring through your fingers.
[* black] |Since the o-rings will make a pretty tight fit with the tubes, it is recommended that a lubricant be used on the o-ring to assure the o-ring gets seated properly.
[* black] To apply the lubrication to the o-ring, squeeze a small amount of lubrication onto your finger and then move the o-ring through your fingers.