OpenROV

Site Navigation

Your Account

Choose Language

High Capacity Battery Preparation

Written By: OpenROV (Sofar)
  • Comments: 0
  • Favorites: 0
  • Completions: 4

Difficulty

Moderate

Steps

7

Time Required

00:30:00 - 01:00:00

Sections

1

Flags

0

Tools

Parts

No parts specified.

  1. These are the steps needed to ensure that the High Capacity Batteries are making good contact.
    Edit

  2. Make sure you are removing the bottom cover over the flat side (negative side)

    • Make sure you are removing the bottom cover over the flat side (negative side)

    • When using sharp objects, be careful not to cut yourself.

    Edit

  3. |

    • |

    Edit

  5. |

    • |

    Edit

  6. Make a blob of solder on the top (positive side) of the battery.

    • Make a blob of solder on the top (positive side) of the battery.

    • When completing this process make sure the battery does not get too hot to touch or you can cause damage to the battery.

    • Use caution when soldering electronic components. The temperatures are 500 degrees F and higher. Eye protection is required.

    Edit

  7. It is better for the solder blob to be wider and not taller.

    • It is better for the solder blob to be wider and not taller.

    Edit

  8. Complete this process for all 6 batteries.

    • Complete this process for all 6 batteries.

    Edit
Finish Line

4 other people completed this guide.

Author

OpenROV (Sofar)

Member since: 09/28/2013

28,276 Reputation

37 Guides authored

Team

OpenROV Internal Member of OpenROV Internal

Community

1 Member

37 Guides authored

0 Comments

Add a comment

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 595