Site Navigation

Your Account

Choose Language

High Capacity Battery Preparation

These are the steps to ensure that the batteries make good contact.

  • Author: OpenROV
  • Time estimate: 30 minutes - 1 hour
  • Difficulty: Moderate

Edit Step 1 High Capacity Battery Preparation  ¶ 

Image 1/1:

Edit Step 1 High Capacity Battery Preparation  ¶ 

Edit Step 2  ¶ 

Image 1/1: When using sharp objects, be careful not to cut yourself.

Edit Step 2  ¶ 

  • Make sure you are removing the bottom cover over the flat side (negative side)

  • When using sharp objects, be careful not to cut yourself.

Edit Step 3  ¶ 

Image 1/1:

Edit Step 3  ¶ 

  • |

Edit Step 4  ¶ 

Image 1/1:

Edit Step 4  ¶ 

  • |

Edit Step 5  ¶ 

Image 1/1: When completing this process make sure the battery does not get too hot to touch or you can cause damage to the battery.

Edit Step 5  ¶ 

  • Make a blob of solder on the top (positive side) of the battery.

  • When completing this process make sure the battery does not get too hot to touch or you can cause damage to the battery.

  • Use caution when soldering electronic components. The temperatures are 500 degrees F and higher. Eye protection is required.

Edit Step 6  ¶ 

Image 1/1:

Edit Step 6  ¶ 

  • It is better for the solder blob to be wider and not taller.

Edit Step 7  ¶ 

Image 1/1:

Edit Step 7  ¶ 

  • Complete this process for all 6 batteries.

You're Done!

0 Comments

No comments.

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 22

All Time: 236