OpenROV

Site Navigation

Your Account

Choose Language

This guide walks you through all the steps for constructing an OpenROV 2.6 from the part included in a standard kit.

21 Questions View all

Options

No connection with software step 94 please help!

Hi, I am in step 94 and couldnt get the connection with the software.. I have done all right at step 93 but there is one thing I dont understand it says ; "use the following ip address" and enter in 192.168.254.*

The last number is an asterix * but I havent been able to put that. Please if somebody could help...

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

3 Answers

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Ok so I have only just stumbled across this site a few days ago, but I would guess the IP address of the ROV is 192.168.254.1

So the IP address of your machine needs to be similar, but not the same. I would suggest you

try a 2 instead of *

Was this answer helpful?

Yes No
Score 1
Add a comment

Options

Hello Eduardo,

Jeremy is correct. You should set your computer's IP address to 192.168.254.2

-Brian G.

Was this answer helpful?

Yes No
Score 0
Add a comment

Options

there are two ip's the other is the address to gain access to the rov

it's 192.168.254.1:8080 no don't change the "1" this second ip is used with chrome or whatever browser you use

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

eduardo will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 162