Skip to main content

Site Navigation

Your Account

Choose Language

This guide walks you through all the steps for constructing an OpenROV 2.6 from the part included in a standard kit.

21 Questions View all

Why don't camara LED lights work?

ROV 2.6, Big mystery;

The Camara LED lights don't function. They work when independently connected to batteries directly. They are connected to the correct pins. The Pins have power going to them, and the pins can be powered on and off from the computer control panel. The voltage at the pins seems fine. But the lights dont go on when they're coonnected to the pins. dobble checked that the pin connection is OK ???

H

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Hmmm... based on what you describe, I'd expect the lights to work. Can you send some photos of your setup to eric@openrov.com? I'll see if anything seems out of the ordinary.

Eric

Was this answer helpful?

Score 0

Comments:

Things Just got lotworse. I accidently shorted pins P1+ and P1-. Everything stopped working. the camera was the only thing that worked. Tried to reload the programming and got error messages.

Do we have to replace the beagle bone board or the arduino board or both?

Can you offer any ideas on what we might try??

Roger/ Harvey

by

Add a comment

Add your answer

Harvey will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 390