Skip to main content

Site Navigation

Your Account

Choose Language

IMU is not recocognised

Hi there,

I have just finished adding the IMU to my ROV (2.8), but it does not appear to be recognised in the Cockpit.

I am trying some trouble shooting - the wiring connections look OK. The only thing I can think of that might be causing issues is when I soldered the wires onto the IMU, the solder ran between the 4 wire connections - could this cause the problem?

I have updates the BBB and Arduino as per instructions.

Regards

Chris

Answer this question I have this problem too

Is this a good question?

Score 1
Add a comment

1 Answer

Hello Chris,

It sounds like you have a solder bridge between all 4 of the wires and the circuit board. This will indeed cause a problem. Please reach out to our support team about your issue.

Thanks,

-Brian G.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Chris Fletcher will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 34