Skip to main content

Site Navigation

Your Account

Choose Language

Learn how to drive and maintain your OpenROV.

9 Questions View all

Deep ( profondità )


I wanted to know what's the maximum deep the robot is able to join ?

Thank You

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer


The depth rating of the OpenROV v2.8 is 100 meters.

-Brian G.

Was this answer helpful?

Score 0


Hi Brian, what's the tolerance on the 100 m limit? We're wanting to have a look at some seafloor which is about 115 m deep, so just outside the v2.8's range. Is there anyway to make it a little more waterproof?


The tolerance on that limit depends on how well you construct the endcaps on the electronics tube. It is not the waterproofing part that will fail, but the increase in pressure, which will cause the endcaps to shear off and collapse into the tube. You can do a search on the forum to see what other people have done in order to travel deeper ( While I can not guarantee that a stock 2.8 will work past 100 meters, there is some wiggle room in there and with a careful build should be ok. You will also need to extend the length of the tether. I would love to hear what you end up deciding to do and how it works out. Please let me know if you have additional questions. -Brian G.


Add a comment

Add your answer

Zenyatta63 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 1,146